HOW TO WRITE OR REPAIR IMEI OF A PHONE USING SN WRITE TOOL AFTER FLASHING OR UNBRICKING.

Most phones lose their International Mobile Equipment Identity (IMEI) after flashing / unbricking. This problem occurs due to damage of the NVRAM of the phone. When this occurs, the phone is unable to receive network from any service band. Mostly the phone will be displaying “Invalid IMEI”. You can check the for the phone’s IMEI status by dialing *#06#.
Whenever such problems occur to you, follow these simple steps to fix it easily by using SN write tool.
Write the phone’s IMEI number on a sheet of paper or in a notepad. The IMEI of a phone is mostly found written in the phone when the battery is removed. For phones with unremovable battery, it is written on the sticker placed on the battery.

Download android cdc driver from here
Download Vcom driver from here
Download SN Write tool from here

After downloading cdc driver or Vcom driver and the SN write tool, follow the steps below.
Extract and install drivers and also SN Write Tool on your computer.
Locate SN Writer Icon and run it as administrator.
When launched, from the ComPort menu, select USB VCOM.
From the target menu, select SMART PHONE.
 Click on SYSTEM CONFIG.
From the write option menu, select IMEI.
From IMEI option menu, tick the number of IMEI you want to write (That depend on the on the number of SIM cards used by the phone).
Locate the database file menu, click on MD1_DB to load the database file. This file is comes with the firmware used to flash the phone. From the firmware folder it is the file that starts with BPLG.
From the same menu, click on AP_DB to load the other part of the database file. From the firmware folder it is also the file that starts with APDB.
Click on SAVE.
Now, click on the START.
Under the scan data, write the IMEI_1 and IMEI_2 (For dual SIM).
Click on OK button.
Now, you can connect the phone through USB after switching off the phone and hold the volume buttons to before connecting the cable. This will let the phone boot to “META MODE”.
Once IMEI writing is finished you will be able to see the Green Pass message.

HOW TO FLASH / UNBRICK MTK PHONES USING SP FLASHTOOL.

Before you can flash or unbrick your mtk phone, you need to download the firmware of the phone. The firmware for various phones can be downloaded from here or here.  You can also search for your phones flash file or firmware through google search engine. This is done by entering a simple phrase like “Firmware download for Infinix x551”. That is by typing your phone’s model and adding the word “Firmware” to it.

After downloading your phones firmware Extract the firmware into a folder.You can also download and install Vcom drivers from here
Download Sp flashtool from here
Extract flashtool zip or rar file.
Open the extract and find “flashtool”.
Run Flashtool as administrator.
Click on load-scatter to load the firmware into the sp flashtool. A pop up menu appears browse to the folder where you extracted the firmware to and locate a file name “Scatter File” and open.
When the files are loaded,
Make sure you untick pre_loader and DSL_BL especially for MTK6572 and the older versions of the chipset.
Click on download.
Power off the phone, remove the battery (if the battery if removable).
Press both volume keys of the phone and connect the USB data cable to the phone. You can insert the battery if removable. 
You can release the volume buttons when you notice the phone has been detected by Sp flashtool.
Wait for the firmware to be downloaded to the phone.
When it is done a green tick sign will be displayed on the flashtool.
Disconnect the phone and boot.

 NB:  THIS MUST BE DONE WITH THE PHONE HAVING NOT LESS THAN 40%. DO NOT CANCEL OR REMOVE THE USB CABLE DURING FLASH. THE PHONE MAY GO COMPLETELY DEAD AND WILL NOT BE DETECTED BY COMPUTER OR POWER UP. MAKE SURE YOU FLASH THE PHONE WITH THE CORRECT FIRMWARE. FLASHING THE WRONG FIRMWARE WILL MAKE THE PHONE GO COMPLETELY DEAD.


We do not take responsibility for flashing the wrong firmware, killing the phone completely or not practicing the process correctly. 

THANK YOU AND DO NOT FORGET TO COMMENT AND SHARE IF THIS INFORMATION IS HELPFUL.

PURCHASING INTERNET BUNDLE WITHOUT PAYING YOUR BORROWED AIRTIME.

PURCHASING INTERNET BUNDLE WITHOUT PAYING YOUR BORROWED AIRTIME.
Airtime SOS services are plans implemented by the various service providers in Ghana to help their various customers in terms of need. Especially when making that important and serious call.
Various network providers have different payment plans and different interest rates. Some networks do not play with their deductions or should I say repayment but other take is very slow and even considers their customers during deductions by leaving them with a couple of pesewas left for the customer. Sometimes it feels very heart breaking to be deducted some airtime when you desperately need Internet bundle for other important stuffs but cannot repay the borrowed credit.
Hurray!!! We found a way for You... Yes for You especially our reader who uses Vodafone and MTN. This is very simple just read and enjoy your Internet life without a break.
⦁ Get a different SIM card which has not been used to borrow airtime.
⦁ Load the amount of airtime you want on that SIM card.
⦁ Dail the short code used for purchasing Internet bundle from Your network provider.
⦁ In the next menu select "Me2U" or "Bundle for someone"
⦁ Follow the simple command prompt but remember to enter the number you want to bundle for as the receiver number.
⦁ When it is successfully done, a message will be received from your service provider notifying you about a gift bundle received.
But for Airtel uses it is just simple,
Dail *126*Recharge code# OR You can choose to recharge and later bundle since it takes approximately 10 minutes before Airtel does their deductions.
ENJOY YOUR INTERNET LIFE ... DO NOT FORGET TO COMMENT...
THANKS FOR YOUR TIME!!!